More Protection and Care
to Your Cargo!
HOME
Culture&Views Agent Wanted Order Tracking Is Your Cargo Safe?

CARGO-MOVE®
——Plastic Drum



Filling
1. Open the lid, insert the pipe with outer diameter smaller than the mouth, and screw the lid.
2. The filled liquid temperature should be lower than 60 ℃. Screw the lid after cooling down the inner liquid to be normal.
3. It is suggested to use torque spanner for tightening drum lid to ensure tightly sealed.
4. For lids with outward screw thread, screw the lid tightly and cover the safety lid. For lids with inward screw thread, there shall not be wrong picks and slipped thread after tightening the lid. Please also check whether the sealing ring is properly installed and there is no break off.
5. When filling the liquid, avoid splash injury to the operator

Stacking & Storage

1. Stack drums on double-side flat pallets after packaging. The pallet size is less than 1.3 M, Only 1 layer drum is allowed to stack on each pallet. The number of piled drum depends on the size of pallet. The edge of drum should not reach out the edge of pallet. The drums should be symmetrically put on the pallet, so that the barycenter of the whole pallet and the upper drum can be kept in a line.
2. Drums stacking on the pallets should be fixed and packaged by wrap film. Avoid the crush damage and distortion between the drums. The distortion shall less than 5%. The pallets’ stacking should no more than 2 layers after packaging. The upper and bottom layers should be aligned, so that the upper weight is equally distributed on the bottom layer. The stacking place must be flat and in horizontal line.
3. Awning stored, avoid insolation, storage temperature range: -18 ℃~40 ℃.
4. Valid Storage period of drum is within 2 years from the production date.

Loading & Transportation

Dangerous goods in long-distance transportation:
1. It should be stacked by pallets in size of less than 1.3 meters. The edge of drum shall not reach out the pallets’ edge.
2.When load the drums into container or onto truck, the upper & lower layers shall be stacked in alignment to avoid incline. The container or truck shall have strong wall or fences in the same or bigger height to prevent collapse. 3. The chemical compatibility shall be confirmed between bulking liquid and containers & sealing parts before using. If you are not assure of the compatibility, experiment shall be made. We are not responsible for the compatibility problem without our confirmation. 4. Avoid collision to sharp objects during transportation.

please follow the instructions and use properly.